3m swing gate full ALPIS H.140cm + 1m gate ALPIS H.140cm aluminium anthracite grey

Swing gate 3m solid ALPIS H.140cm aluminium Anthracite grey

Looking for a Swing gate to enhance your property entrance? Discover the ALPIS Gate 3 m wide and 140 cm high. Entirely made of aluminium, it stands out for its solid design, XL slats and Anthracite grey Sand-textured finish with a Contemporary style.

A solid Swing gate to enhance your entrance

The ALPIS Swing gate allows you to define access to your property and create a 3 m wide passage. Its two Gate leaves open inwards onto your land and therefore require sufficient space to allow them to open fully.

Its solid design limits visibility through the Gate and helps better protect your outdoor space from overlooking from the street or neighbouring properties. Its Height of 140 cm clearly marks the separation between your property and the outside.

The ALPIS Gate stands out with its wide XL slats and Contemporary lines. Anthracite grey is combined with a matte Sand-textured finish that adds a subtle textured effect to the aluminium surface, without a shiny appearance.

Designed for outdoor use, this aluminium Gate resists winds of up to 90 km/h. Its installation requires pillars or posts of at least 160 cm high.

To facilitate future Motorisation, two reinforced aluminium slats are supplied with the Gate. They can be placed in the slats of your choice to reinforce the areas where the motor arms are attached.

Why choose a Swing gate?

The Swing gate is simple to install when you have sufficient Depth to open both Gate leaves. Unlike a Sliding gate, it requires neither Ground track nor Side clearance space. Its installation therefore requires less preparatory work at the entrance.

Material: Thermolacquered aluminium certified QUALICOAT
Colour: Anthracite grey RAL 7016 matte Sand-textured finish
Dimensions: Width 300 cm x Height 140 cm
Compatible pillar spacing: 303.5 cm to 306.8 cm
Minimum pillar height: 160 cm
Wind resistance: up to 90 km/h

Precautions during assembly

When assembling the Finishing covers, we recommend placing a protection, such as a Soft cloth or piece of cardboard, between the mallet and the Pedestrian gate to avoid direct contact. This precaution helps prevent Scratches or damage to the Upholstery.

About aluminium

Thermolacquered aluminium is particularly suitable for outdoor equipment exposed to the elements. It does not Rust and resists moisture as well as temperature variations. Unlike Wood which requires regular treatments, or PVC which can deteriorate over time, a thermolacquered aluminium Gate durably retains its appearance while requiring minimal Care.

Thermolacquering certified QUALICOAT

The ALPIS Gate benefits from QUALICOAT certified thermolacquering, a label that attests to the quality of the finish applied to the aluminium. This certification helps ensure good Colour retention and Upholstery resistance to external conditions. Your Anthracite grey Gate thus more durably maintains its appearance and finish, whilst requiring minimal Care.

How to care for your aluminium Gate?

Aluminium requires minimal Care, but regular Cleaning extends its lifespan. Once or twice a year, simply use lukewarm soapy Water with a Soft cloth, then rinse and dry thoroughly. Avoid abrasive products and high-pressure Cleaning, which could damage the lacquer.

Need help choosing your aluminium Gate?
Contact our customer service; our team is here to advise you.

For this product

Clear instructions

Quick and easy assembly

Find all the necessary information about this product in the Technical specifications

Download the instructions

Pedestrian gate 1m solid ALPIS H.140cm aluminium anthracite grey

Looking for an aluminium pedestrian gate to arrange access to your property? Discover the ALPIS pedestrian gate, 1 m wide and 140 cm high, in anthracite grey aluminium.

A solid pedestrian gate to organise your entrance

The 1m ALPIS pedestrian gate allows you to create a pedestrian entrance to your property and define your entrance, courtyard or garden. Its width of 1 m provides a dedicated passage for pedestrian movement, without having to open the main gate. Its solid infill limits visibility through the pedestrian gate. This allows you to better separate your outdoor space from the street or neighbouring properties.

The design of the ALPIS pedestrian gate stands out for its wide horizontal slats, giving the gate a contemporary style. Anthracite grey reinforces its clean design. It is combined with a sand-textured matte finish that adds texture to the aluminium surface and avoids a glossy appearance. The ALPIS aluminium pedestrian gate can thus fit in front of a contemporary building as well as in an outdoor space with simpler lines.

The ALPIS pedestrian gate resists winds of up to 90 km/h. Its aluminium frame is lightweight, resistant to corrosion and requires minimal care, qualities suited to outdoor installation.

To ensure proper fixation and good overall stability, installation requires pillars or posts of at least 160 cm in height.

To facilitate future motorisation, a reinforced aluminium slat is supplied. It can be placed in the slat of your choice to reinforce the area where the motor arm attaches.

Material: Powder-coated aluminium certified Qualicoat
Colour: Anthracite grey RAL 7016 sand-textured matte finish
Dimensions: Width 100 cm x Height 140 cm
Space between pillars: 103 cm to 104.8 cm
Minimum pillar height: 160 cm
Wind resistance: up to 90 km/h

Precautions during assembly

When assembling the finishing slats, we recommend placing a protective layer, such as a soft cloth or piece of cardboard, between the mallet and the pedestrian gate to avoid direct contact. This precaution helps minimise the risk of scratches or damage to the upholstery.

About aluminium

Powder-coated aluminium is particularly suited to outdoor equipment exposed to the weather. It does not rust and resists humidity as well as temperature fluctuations. Unlike wood which requires regular treatment, or PVC which can deteriorate over time, a powder-coated aluminium pedestrian gate durably retains its appearance while requiring minimal care.

Powder coating certified QUALICOAT

The ALPIS pedestrian gate benefits from QUALICOAT-certified powder coating, a label that certifies the quality of the finish applied to the aluminium. This certification helps ensure good colour retention and coating durability against outdoor conditions. Your anthracite grey pedestrian gate thus retains its appearance and finish more durably, while requiring minimal care.

How to care for your aluminium pedestrian gate?
Aluminium requires minimal care, but regular cleaning extends its lifespan. Once or twice a year, simply use warm soapy water with a soft cloth, then rinse and dry thoroughly. Avoid abrasive products and high-pressure cleaning, which could damage the coating.

Need help choosing your aluminium pedestrian gate?
Contact our customer service team, our staff are here to help and advise you.

For this product

Clear instructions

Quick and easy assembly

Find all the necessary information about this product in the Technical specifications

Download the instructions