- This pack contains:
- ATHOS VELETA composite swing gate
- Teak composite slats and aluminum frame
- 2 aluminum posts 10x10cm H.166cm gray
ATHOS VELETA 3m H.160cm solid wood composite swing gate in teak with aluminum frame + 2 EIFEL aluminum posts 10x10cm
PAC-004868
1251.00 €TVA 10% ✓ excl. VAT
Guarantee: 2 years
- This pack contains:
- ATHOS VELETA composite swing gate
- Teak composite slats and aluminum frame
- 2 aluminum posts 10x10cm H.166cm gray
Secure payment
Delivery within 5 days
Free shipping
ATHOS VELETA 3m H.160cm solid wood composite swing gate in teak with aluminum frame + 2 EIFEL aluminum posts 10x10cm
1251.00 €
Save money! Discover the packs bundled with this product
Description
ATHOS VELETA 3m H.160cm teak swing gate with aluminum frame, made of composite wood, with a 3m wide design and aluminum frame
This ATHOS wood-effect swing gate features a stylish infill designed to protect access and limit outside views. The composite material provides a warm look without the need for painting or regular maintenance. Supported by a Qualicoat-certified powder-coated aluminum frame, the entire structure gains rigidity, corrosion …
Post EIFEL 10x10cm H.190cm grey anthracite
EIFEL powder-coated aluminum posts have been specially designed for the installation of swing gates or wickets.
The practical cap on our EIFEL posts is easy to install and remove, allowing you to run electrical wires through them if you need to motorize your gate …
ATHOS VELETA 3m H.160cm teak swing gate with aluminum frame, made of composite wood, with a 3m wide design and aluminum frame
This ATHOS wood-effect swing gate features a stylish infill designed to protect access and limit outside views. The composite material provides a warm look without the need for painting or regular maintenance. Supported by a Qualicoat-certified powder-coated aluminum frame, the entire structure gains rigidity, corrosion resistance, and consistent appearance throughout the seasons.
The composite slats combine fibers and resin to minimize warping and water absorption. The composite material offers a convincing wood effect without the need for paint, stain, or insecticide treatment. The Qualicoat certification of the powder coating guarantees a finish suitable for outdoor use. It helps the aluminum frame maintain its appearance and strength despite the weather conditions.
Material: Powder-coated aluminum frame (Qualicoat), composite wood infill, and decorative aluminum panels
Color: Teak
Dimensions: 300 x 155 cm
Minimum post height: 175 cm
Spacing between posts: 303 to 306 cm
Wind resistance: 100 km/h
Net weight: 71.7 kg
- 4 powder-coated aluminum uprights (80 × 45 × 2 mm)
- 4 powder-coated aluminum crossbars (80 × 35 × 2 mm)
- 2 reinforced bottom crossbars for motorization (3 mm thick)
- 2 decorative aluminum plates (3 mm thick)
- 18 composite wood slats (158 × 16 mm, 3.9 mm thick)
- 2 top hinges
- 2 bottom hinges
- 2 side stops
- 1 center stop
- 1 cylinder lock
- 1 black handle
- 3 keys
- Finishing caps
- Screws
Stability is one of the main advantages of a composite swing gate. The composite slats absorb very little moisture and limit the movement that can disrupt the alignment of a wooden structure. They maintain a warm appearance without the risk of rot. The powder-coated aluminum frame complements this durability with its rigidity and resistance to external elements. The result is ideal for projects where the material's consistency is as important as its appearance.
Cleaning the wood-effect gate is quick and easy: a non-abrasive sponge, water, and a little pH-neutral soap are all you need. Rinsing prevents deposits from forming on the slats and the powder-coated aluminum. There's no need to apply a surface protector, stain, or water-repellent treatment. After heavy rain or pollen, a quick rinse prevents deposits from building up.
For this product
Clear instructions
Quick and easy assembly
Find all the necessary information about this product in the Technical specifications
Download the instructionsPost EIFEL 10x10cm H.190cm grey anthracite
EIFEL powder-coated aluminum posts have been specially designed for the installation of swing gates or wickets.
The practical cap on our EIFEL posts is easy to install and remove, allowing you to run electrical wires through them if you need to motorize your gate or wicket, or to install motorized accessories (flashing lights, photocells, etc.).
This 10x10cm EIFEL post, measuring 190cm high, is suitable for all aluminum swing gates and wickets up to 180cm high.
Color: Anthracite Gray - RAL 7016
Material: Aluminum
Post Height: 1.90 m
Post Cross Section: 10 x 10 cm
Patina Cross Section: 15 x 15 cm
Installation Method: Screw-in or sealed
Maximum Gate Height: 180 cm
- Post
- Plastic finishing cap with fixing screws (anthracite gray color)
- Expansion bolts (for ground mounting)
Tips:
Gate weight less than 80 kg: You can secure your post by screwing the post mounting plate to the ground (bolts included in our kits)*
Gate weight over 80 kg: It is recommended to concrete and reinforce the EIFEL post to strengthen it (see technical diagram).
* For hollow posts, we recommend securing the plate using 10x120 mm anchor bolts for a stronger and more secure attachment.
For concrete-covered posts, you can easily secure your post using the bolts included in our kits.
Compatible with all CASANOOV gates and wickets with a height of 160 and 180 cm.
The 10x10 cm EIFEL post is available in a height of 166 cm.
Also available in the following sections: 15x15 cm; 20x20cm
If your installation requires multiple posts, you'll find promotional offers in the "Gate Accessories" category, including sets of 2 or 4 EIFEL posts of your choice.
Clear instructions, quick and easy assembly.
Find all the necessary information about this product in the technical specifications.
For this product
Clear instructions
Quick and easy assembly
Find all the necessary information about this product in the Technical specifications
Download the instructionsTechnical data
-
Supplied accessories
Yes
-
Locking system
Cylinder lock
-
Top cover cap
Yes
-
Compatible pillar spacing
303-306 cm
-
Colour
Teck
-
Finishing
QUALICOAT
-
Height
163 cm
-
Width
301 cm
-
Frame material
Aluminium
-
Main material
Composite wood
-
Compatible engines
Yes
-
Opening direction
Towards the house
-
Opening system
Swing gate
-
Type of filling
half openworked
-
Pivoting system
Ball bearing
-
Stud/rail assembly
Self-drilling screws
-
End stop
2
-
Central stop
Yes
-
Handle colour
Black
-
Operating clearance
30 mm
-
Blade section
158*16 mm
-
Amounts Section
80*45 mm
-
Sleeper Section
80*35 mm
-
Assembly time
8 h
-
Compatible motorization type
Articulated arm and jacks
-
Type of lock
Keys (3)
-
Thickness of the blades
3.9 mm
-
Stud thickness
2 mm
-
Sleeper thickness
2 mm
-
Available in sliding
No
-
Eligibility Extension of warranty 10 years
No
-
Eligibility Extended warranty 5 years
No
-
Warranty
2 an(s)
-
Minimum pillar height
175 cm
-
Handle material
Aluminum
-
Assembly instructions
Yes
-
Number of lower hinges
2
-
Number of upper hinges
2
-
Recommended number of persons for assembly
2
-
Wind resistance
100 km/h
-
Warranty
2 an(s)
-
Screws included
Yes
-
Main material
Steel
-
Section
10x10 cm
-
RAL
7016
-
Height
190 cm
-
Thickness
2 mm
-
Notice
Yes
-
Hat size
12,5x12,5 cm
-
Stage size
15x15 cm
-
Type of installation
On a turntable
-
Platinum thickness
10 mm
-
Finishing
Powder coating
-
Width
10 cm
-
Mounting plate included
Yes
-
Colour
Charcoal grey
-
Installation type
On a turntable
Questions from our customers
All our products are delivered in kit form and to be assembled by you.
We have designed and imagined our products so that they are easy to assemble, and your customer experience is pleasant.
We have provided you with clear assembly instructions that you can download.
All the accessories necessary for the installation of your portal are provided to you, and everything that is included in our portals is specified in the technical characteristics of the product as well as in the description.
You can find all this information on each of our product sheets through these different tabs:
- In the “Technical characteristics” tab
- In the “Technical drawing” tab
- In the “Assembly instructions” tab
If, upon receipt and assembly of your products, you have any questions about the installation, you can always contact us through the Casanoov contact form.
For orders where all products are advertised as "In stock", we do our best to prepare your order in less than 24 hours.
Delivery times are communicated to you on each of our product sheets.
- To do this, look for the model you want, you will then find its product sheet:
- The delivery time will be notified directly on the product sheet, next to the add to cart button
For orders with products "in reservation", preparation and delivery take place at the time of the effective return to stock.
We offer you in full consciousness a longer delivery time to allow you to receive your entire order in a grouped manner.
You are advised to place two different orders if you wish to receive the products in stock more quickly and place a second order with the products for which we are awaiting stock.
Our delivery costs are free, so this will have no impact on your final cost.
You can contact us via the contact form, section "Question about a product". We will do our utmost to provide you with all the help you need and to answer your questions about our articles.
A Question/Answer system will be set up very quickly on each of our products so that your questions can also help the Casanoov community in their choice!
All our products have a 2-year commercial warranty.